ViewSonic E70fb manual Quick Installation

Quick Installation

1.	Connect power cord		(Continued)
	Connect the power cord to a properly
	grounded AC outlet.		(2) Wait for the CD-ROM to auto-start.
2.	Connect video cable		Note : If the CD-ROM does not auto-
			start:
	Make sure both the monitor and
	computer are turned OFF.		double-click on the CD-ROM icon in
	• Connect the video cable to the		Windows Explorer, then double-click on
	computer.		viewsonic.exe.
	Macintosh® users: Models older than		(3) Follow the on-screen instructions.
	G3 require a Macintosh adapter. Attach	5.	Windows users: Set the Timing
	the adapter to the computer and plug the		Mode (resolution and refresh rate)
	video cable into the adapter.
			Example: 1280 X 1024 @ 75Hz.
	To order a ViewSonic® Macintosh
			For instructions on changing the
	adapter, contact ViewSonic. See
	“Customer Support” on page 12.		resolution and refresh rate, see the
3.	Turn ON monitor and computer		graphic card’s user guide.
			Installation is complete. Enjoy your
	Turn ON the monitor, then turn ON the
			new ViewSonic color monitor.
	computer. This sequence (monitor before
			To be best prepared for any future
	computer) is very important.
	Note : At this point Windows users may		customer service needs: print this user
	receive a message asking them to install		guide and write the serial number in
	the INF file.		“For Your Records” on page 2. (See
4. Install Display Optimization files			back of monitor.)
			To register your product go online to
	(INF and ICM files)
			www.viewsonic.com.
	(1) Insert the ViewSonic Wizard CD-
			The ViewSonic Wizard CD-ROM also
	ROM into your computer’s CD-ROM
	drive.		provides an opportunity for you to print
	Note : If your computer does not have a		the registration form which you may
	CD-ROM drive, see “Customer Support”		mail or fax to ViewSonic.

on page 12.

Power cord

AC wall outlet

Video cable

ViewSonic E70fB/E70fSB 4