4 ViewSonic E90f/E90fb
Quick Installation
1Connect the monitor and
computer power cords to a
properly grounded AC outlet.
2Connect the video cable from
your monitor to your computer.
NOTE: Macintosh users may
need an adapter. (See Customer
Support on page 12.)
3Turn on your monitor, then your
computer. This sequence (monitor
before computer) is important.
NOTE: Windows 95, 98 or 2000
users may receive a message
asking them to install the INF file.
This is on the CD.
4Insert the ViewSonic Wizard CD.
NOTE: If you do not have a
CD-ROM drive, contact
ViewSonic Customer Support.
NOTE: If the CD does not auto-
start, double-click the CD icon in
Windows Explorer, then double-
click vswzrd.exe.
Macintosh users: from the
Macintosh desktop, double-click
on the “ViewSonic Wizard”
folder, then double-click on the
“ViewSonic” icon.
5Follow the on-screen instructions.
Windows users: Set the timing
mode (see Setting up the Timing
Mode on page 5).
To register your product online, go to
the ViewSonic website for your
region. See the Customer Support
table in this guide.
Power cabl es
AC wall
outlet VGA video
cable