6Getting Started
ViewSonic EF70
E
N
G
L
I
S
H
Power cord Video cable
Quick Installation

1 Connect video cable

Make sure both the monitor and
computer are powered OFF. Connect
the video cable to the computer.

Macintosh

®

users:

Connect a
Macintosh adapter to the video
cable, then to the computer. To
order a ViewSonic
®
Macintosh
adapter, send an email to vsparts
@viewsonic.com or contact
ViewSonic (see the back cover of
this guide). You will need to provide
your monitor's serial number.

2 Connect power cord

Connect the power cord from a properly
grounded AC outlet to the monitor.

3 Power-ON monitor and computer

Power-ON the monitor, then power-
ON the computer. This sequence
(monitor before computer) is very
important.
NOTE: At this point Windows®

98
users may receive a message asking
them to install the EF70’s INF file.

4 Install INF and ICM files

• For CD-ROM: Insert the CD-ROM
into your system, wait for it to auto-
start, select “Monitor Drivers,” and
follow the on-screen instructions.
•For diskette: Insert the diskette into
your system, run install.exe, and
follow the on-screen instructions.

5Windows users: Setting the

Timing Mode (resolution and refresh

rate)
Example: 1024x768@ 75Hz.
For instructions on changing the resolu-
tion and refresh rate, see the user
guide for your computer's graphics
card.
6Use the OnView® controls to

adjust the screen image.

See the
Operations
section in this
guide.
Wall socket
Installation is complete!
Enjoy your new EF70 Monitor!
To be best prepared for any future
customer service needs:
• Write the serial number (see back
of the monitor) in
"For your Records"
on page 1 of this guide.
• Register the warranty of your monitor
on the Internet at:
http://www.viewsonic.com