ENGLISH
6

ViewSonic M70/M70B

1 Connect video cable

Make sure both the M70/M70B and
computer are powered OFF. Connect
the video cable to the computer.

Macintosh

®

users:

Connect a
Macintosh adapter (part No. VMAC-1)
to the video cable, then to the M70/
M70B. To order an adapter, contact
ViewSonic® (see the back cover of this
guide). You will need to provide your
M70/M70B's serial number.

2 Connect power cord

Connect the power cord to a prop erly
grounded AC outlet, then to the M70/
M70B.

3 Power-ON computer and monitor

Power-ON the computer, then power-
ON the M70/M70B monitor.
NOTE: At this point Windows®

98 users
may receive a message asking them to
install the M70/M70B's INF file.

4 Install INF and ICM files

• For CD-ROM: Insert the CD-ROM
into your system, wait for it to auto-
load, select “Monitor Drivers,” and
follow the on-screen instructions.
Quick Installation

4 Install INF and ICM files (cont.)

• For diskette: Insert the diskette into
your system, run install.exe, and
follow the on-screen instructions.

5 Audio Installation (optional)

• Speakers: Connect audio cable to
the AUDIO OUT port of your
computer's sound card, then to
the monitor's AUDIO IN port (see
illustration below).
•Microphone: Connect audio cable
to the MIC IN port of your
computer's sound card, then to
the monitor's MIC OUT port (see
illustration below).

6Windows users: Setting the

Timing Mode (Resolution and

Refresh Rate)

Example: 1024x768 @ 75Hz

Resolution Right-click on the
Windows desktop > Properties >
Settings > "Desktop Area." Set the
resolution.
Refresh Rate (vertical frequency)
See your graphic card's user guide
for instructions.

Getting Started

Installation is complete! Enjoy your new M70/M70B Monitor!
To be best prepared for any future customer service needs:
• Write the serial number (see back of the monitor) in

"For your Records"

on page 1 of
this guide.
• Register the warranty of your monitor on the Internet at: http://www.viewsonic.com
Power
cord
Video Cable
Wall
Socket
Back of
Computer
AC IN
Audio IN
(from sound card)
Microphone OUT
(to sound card)
External
Microphone IN Headphones
IN