Image Adjust for HDMI Mode
- Be sure to select the HDMI source before operation.
Image Adjust
1 Press MENU and then use 3or4 to display IMAGE ADJUST menu page, press 6to enter.
2 Within the menu, use 5or6 to select, use 3or4 to adjust.
3 Press EXIT button to exit.
| IMAGE ADJUST |
Image size | FILL ALL |
Freeze Image | OFF |
Colorspace | YCbCr |
Option | Function |
| Selects a desired image size (aspect ratio). |
Image size | (Refer to <Setting Picture/Adjusting Image> section in TV mode for details.) |
| |
| Note: you may directly press ZOOM button on the remote control to select. |
| When 1080i or 1080p signal is received, then this item can not be adjusted. |
|
|
| Select "ON" to freeze the image on the screen. Select "OFF" to reactivate the image. |
Freeze Image | Note: you may directly press FREEZE button on the remote control to freeze the image, |
| press again to restore. |
|
|
| When the unit converts DVI signal to HDMI signal, sometimes abnormal color will |
Colorspace | appear, if this situation occurs, you can try to adjust this item. |
ViewSonic | 35 | N4280p |
