ViewSonic PJ750 13
E
N
G
L
I
S
H
No Signal Menu NO SIGNAL Menu
To adjust projector settings before connecting input devices, use the
No Signal menu to set the options below:
Vol um e increases or decreases the speaker loudness.
Keystone corrects image distortion that can occur when the angle of the projection is increased.
Key st on e re si ze s t he top or bottom of the projected image. See “ Adj u st in g th e Pr o je ct or A ng l e” o n
page 7.
Blank selects the background color of a blank screen.
Mirror adjusts the orientation of the screen image based upon the placement of the projector.
• Select Normal for a table-top projection.
• Select H: Invert for rear projection.
• Select V: Invert for a front projection ceiling mount.
• Select H&V: Invert for a rear projection ceiling mount.
Start up selects a start-up menu. You can select or deselect the ViewSonic Welcome menu to
display automatically at start-up.
Menu Color selects a background color for on-screen menus (Orange, Yellow, Green, Blue,
Purple, Gray, Black).
Timer provides a countdown clock that you can set, typically to time a presentation. Set the
countdown timer between 1 and 99 minutes. The time displays on the lower right portion of the
screen when you press the Timer button on the remote control.
Language allows you to select a menu-display language from a list.
Auto Off causes the projector to automatically enter a standby, cool-down mode after a specified
amount of time has elapsed without a signal.
Sync on G allows you to toggle On or Off the Sync on G option.
CAUTION: When you are unsure whether you are using a Sync on G input device, leave this
option set to Off.