6Getting Started
ViewSonic PT775
Quick Installation
1Write the serial number on the back of the monitor in the space
provided on page 1 labeled "For your records" and register your
monitor's warranty on the Internet at: http//:www.viewsonic.com.
2Read the Precautions section thoroughly (page 5) before installing the
monitor. Make sure the computer and the monitor are both turned off
before connecting any cables.
3a PC users: Attach the video cable to the Video Input port on the monitor
(see below), then connect the other end to your computer.
3b Macintosh® users: A Macintosh computer requires a Macintosh adapter
4Attach the power cord to the back of the monitor. Then plug the other
end of the power cord into the power source (wall socket).
5Turn the computer on. Then press the POWER button on the front of
the monitor ON. (The Power light turns green.)
6Adjust the user controls to suit your personal preference. See the
Operation section (page 7). If there are any problems, see the
Troubleshooting section (page 13).
Important: To set the screen resolution, see user's guide of your
computer's graphic card for instructions. For a list of Preset Timing
Modes and the pre-adjusted screen resolution for this monitor, see page 12.
Basic installation is complete! Enjoy your new monitor!
Power
cord
Video
cable
BNC video ports
D-sub video port
Note: BNC
does not
support
Plug & Play
USB INPUT
(Upstream
port -- to
computer)
USB OUTPUT
(4 Downstream
ports on side of
monitor)