Other Information, Specifications, Optiquest Q2201wb

Other Information

LCD	Type	21.6” (full 21.6" viewable diagonal area),
		TFT (Thin Film Transistor), Active Matrix WXGA LCD,
		0.285 mm pixel pitch
	Color Filter	RGB vertical stripe
	Glass Surface	Anti-Glare

Input Signal	Video Sync	RGB analog (0.7/1.0 Vp-p, 75 ohms)
		Separate Sync,
		fh:24-81 kHz, fv:48-76 Hz
Compatibility	PC	Up to 1680 x 1050 Non-interlaced
	Macintosh1	Power Macintosh up to 1680 x 1050
Resolution	Recommended	1680 x 1050 @ 60 Hz
	and supported	1152 x 870 @ 75 Hz
		1152 x 864 @ 75 Hz
		1024 x 768 @ 60, 70, 75 Hz
		832 x 624 @ 75 Hz
		800 x 600 @ 56, 60, 75 Hz
		640 x 480 @ 60, 67, 72, 75 Hz
		720 x 400 @ 70 Hz

Power	Voltage	100-240 VAC, 50/60 Hz (auto switch)

Display area	Full Scan	464.94 mm (H) x 290.59 mm (V)
		18.3" (H) x 11.4" (V)

Operating	Temperature	41° F to + 104° F (5° C to + 40° C)
conditions	Humidity	20% to 85% (non-condensing)
	Altitude	To 9,800 feet

Storage	Temperature	-4° F to + 140° F (-20° C to + 60° C)
conditions	Humidity	5% to 95% (non-condensing)
	Altitude	To 32,800 feet

Dimensions	Physical	527 mm (W) x 437 mm (H) x 205 mm (D)
		20.7" (W) x 17.2" (H) x 8.1" (D)

Weight	Physical	13.9 lb (6.3 kg)

Regulations		UL/cUL, FCC-B, CB, CE, ENERGY STAR®
Power saving	On	48 W (Typical) (green LED)
modes	Off	<1W

Preset Timing Mode (pre-adjusted to VESA® 1680 x 1050 @ 60 Hz)

Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display.

1Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact ViewSonic.

Optiquest Q2201wb