Other Information, Specifications | ViewSonic VA2333-LED specs

Other Information

LCD	Type	TFT (Thin Film Transistor), Active Matrix 1920 x 1080 LCD,
		0.265 mm pixel pitch
	Display Size	Metric: 58 cm
		Imperial: 23” (23” viewable)
	Color Filter	RGB vertical stripe
	Glass Surface	Anti-Glare

Input Signal	Video Sync	RGB analog (0.7/1.0 Vp-p, 75 ohms) / TMDS Digital (100ohms)
		Separate Sync
		fh:24-82 kHz, fv:50-75 Hz
Compatibility	PC	Up to 1920 x 1080 Non-interlaced
	Macintosh1	Power Macintosh up to 1920 x 1080
Resolution	Recommended	1920 x 1080 @ 60 Hz
	and supported	1680 x 1050 @ 60 Hz
		1440 x 900 @ 60, 75 Hz
		1280 x 1024 @ 60, 75 Hz
		1024 x 768 @ 60, 70, 72, 75 Hz
		800 x 600 @ 56, 60, 72, 75 Hz
		640 x 480 @ 60, 75 Hz

Power	Voltage	100-240 VAC, 50/60 Hz (auto switch)

Display area	Full Scan	509.184 mm (H) x 286.416 mm (V)
		20.05” (H) x 11.28" (V)

Operating	Temperature	+32° F to +104° F (0° C to +40° C)
conditions	Humidity	20% to 90% (non-condensing)
	Altitude	To 10,000 feet

Storage	Temperature	-4° F to +140° F (-20° C to +60° C)
conditions	Humidity	5% to 90% (non-condensing)
	Altitude	To 40,000 feet

Dimensions	Physical	547.5 mm (W) x 420.7 mm (H) x 200.3 mm (D)
		21.56" (W) x 16.56" (H) x 7.89" (D)

Weight	Physical	8.07 lbs (3.66 kg)

Regulations		CCC, UL/cUL, FCC-B, ICES-B, ENERGY STAR®
Power saving	On	30W (Typical) (blue LED)
modes	Off	<0.5W

Preset Timing Mode (pre-adjusted to VESA® 1920 x 1080 @ 60 Hz)

Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display.

1Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact ViewSonic.