Do the following to adjust the screen image:

1To display the Main Menu, press button [1].

Main Menu

AUTO

SET

Auto Adjust

Contrast/Brightness

Color Adjust

iInformation

Image Adjust

?Setup Menu

Memory Recall

1:EXIT2:SELECT

NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 11.

2To highlight a control you want to adjust, press I or J to scroll up or down the Main Menu.

3To select the highlighted control, press button [2]. A control screen appears like the example shown below.

Contrast

1:EXIT

2:

Brightness

 

 

 

The line at the bottom of the screen tells you what you can do next: Exit or Select the control that is highlighted.

4To adjust the control, press the up I or down J buttons.

5To save the adjustments and exit the menu, press button [1] twice.

The following tips may help you optimize your display:

Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60 Hz to the LCD dislay. (Look for instructions on “changing the refresh rate” in your graphic card's user guide.)

If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated “active area” of the

LCD dislay.)

ViewSonic VE710b_VE710s 10

Page 11
Image 11
ViewSonic VE710s manual Do the following to adjust the screen image, Following tips may help you optimize your display