Replacing the Remote Control Battery
If the remote control stops working or works improperly, replace the battery (CR2025 lithium battery) with a new one.
1.Pull out the battery tray.
2.Remove the old battery from the tray and put a new battery with “+” facing up.
3.Push the battery tray back in.
Warning
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire
Notes
zWhen the lithium battery becomes weak, the operating distance of the Remote Control may shorten, or the Remote Control may not function properly. In this case, replace the battery with a CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
zDispose the used batteries as specified by the local authorities.
zDo not leave the Remote Control in a very hot and humid place.
zIncorrect use of the battery may cause leaking and corrosion.
-When the Remote control will not be used for a long period of time, remove the battery from the remote control to prevent leaking and corrosion.
-Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire may cause the battery to rupture and leak.
Product Specification
Specification
| Product | 10w Digital P hoto Frame |
|
| Resolution | 1024 x600 Pixel |
|
| Memory Card Formats | Secure Digital™, |
|
|
| Memory Stick Pro™, Memory Stick Duo™, xD Picture |
|
|
| CardTM and USB flash drives |
|
| Image Formats | JPEG, BMP, PNG, GIF, TIFF |
|
| Audio Formats | MP3 |
|
| Video Formats | MPEG1/4, |
|
| USB Ports | USB 2.0 (Host) x 1, |
|
| Power Input | AC 100V~240V, 50~60Hz |
|
| Power Output | DV 5V / 2A |
|
| Internal Speakers | 0.5W x 2 |
|
| Certification | CE / FCC / RoHS |
|
ViewSonic | 4 |
| |
VFM1024W | |||
