Wall Mounting (Optional)
To obtain a
1.Verify that the Power button is turned OFF, then disconnect the power cord.
2.Lay the LCD display face down on a towel or blanket.
3.Remove the rear panel covers from the back of the LCD display.
4.Remove the four screws attaching the base.
5.Remove the Rubber Plugs from inside the four VESA screw holes.
6.Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance).
7.Attach the LCD display to the wall, following the instructions in the
Four VESA screw holes
Rear panel covers
Four base screws
ViewSonic VX710 | 6 |