Counter Balance Spring Adjustment - If Necessary

Installation Procedure

a

b

11b

1 2

Increase tension

Decrease tension

Disconnect cable from hook.

c

Set counter balance spring connector in appropriate

location.

NOTE: For c ustom p anel installation, the door may require adjustment to the preload of the counterbalance springs. Follow these steps to adjust the tension.

Carefully lay dishwasher on its back and attach the kick

To adjust the depth of the kick plate, loosen screws on

plate brackets. Screws for the brackets will already be

the bracket and position in the required depth. Tighten

in the base. NOTE: Be careful not to pinch hoses or

screws and repeat for other side.

power cord beneath dishwasher.

 

2

3

Reconnect cable to hook.

Using tie strap attached to dishwasher, band water line,

Position unit in front of cutout.

 

 

 

drain line, and power cord together.

 

 

4

5a

 

 

Equal distance

 

Up

Down

Slide unit into opening; be sure to feed water, electrical

Using a level, adjust to appropriate height. Left and right

and discharge lines into adjacent cabinet.

adjust side to side and center adjusts front to back.

 

 

(Select models only)

 

16

17

Page 9
Image 9
Viking 200 manual Counter Balance Spring Adjustment If Necessary, 11b

200 specifications

The Viking 200, 450E, and 325E are models of rugged all-terrain vehicles celebrated for their exceptional performance and versatility in challenging environments. Designed with advanced engineering and robust components, these vehicles are ideal for forestry, agriculture, and recreation.

Starting with the Viking 200, this model excels in its balance of power and efficiency. It is equipped with a reliable four-stroke engine that offers smooth acceleration and impressive torque. The overall design emphasizes stability, featuring a low center of gravity that ensures safe maneuverability on uneven terrain. With a spacious cargo bed and a payload capacity, the Viking 200 is perfect for hauling tools, equipment, or supplies.

The Viking 450E takes versatility to a new level with its enhanced features and technologies. This model boasts an upgraded engine that not only increases horsepower but also improves fuel efficiency. Its advanced four-wheel drive system allows for seamless transitions between different types of terrain, ensuring that users can traverse mud, snow, and rocky paths with ease. The Viking 450E also features adjustable suspension systems that enhance comfort, making long drives less taxing on the operator.

On the other hand, the Viking 325E stands out due to its compact design without sacrificing performance. It is particularly appreciated in environments where space is limited, allowing it to navigate tight trails and narrow pathways effortlessly. Despite its smaller size, the Viking 325E is equipped with a high-capacity engine and durable chassis that can withstand heavy use. The model incorporates cutting-edge technologies such as electronic fuel injection for improved responsiveness and low emissions.

Each of these Viking models is designed with user comfort in mind, featuring ergonomic seating and intuitive controls that cater to operators of various experience levels. High-visibility dashboards and integrated lighting systems ensure that users can operate these vehicles safely, even in low light conditions.

Overall, the Viking 200, 450E, and 325E showcase the brand’s commitment to quality and innovation in the all-terrain vehicle market. With their impressive features, robust performance, and cutting-edge technologies, these models continue to be a preferred choice for a wide range of applications, making them indispensable tools for outdoor enthusiasts and professionals alike.