FRONT
|
|
|
|
|
| DFWD - CABINET CUTOUT |
| B |
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REAR
21/2” (6.4 cm)
SIDE
120V Electrical opening
2 1/2” (6.4 cm)
1 1/2” (3.8 cm)
22” (55.9 cm)
Cabinet
10”
(25.4 cm)
24” |
|
|
|
Mounting Screws |
|
| |
(61.0 cm) |
| Cavity Assy. | |
(4) - #8 x 3/4” |
| ||
|
|
|
(6) - #8 x 3/4” screws to
C | attach custom front |
|
95/8” (24.4 cm)
91/2”
(24.1 cm)
insulation |
| custom front |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Model | DFWD170 | DFWD100 |
|
|
|
| 25 1/4” | 28 1/4” | |
27” (68.6 cm) |
|
|
| |||
|
|
|
| A | (64.1 cm) | (71.8 cm) |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CUSTOM FRONT INSTALLATION
•Open the drawer and remove the pan.
•Center the custom front and insulation around the inside panel.
*NOTE: Make sure the insulation provided is used between the custom panel and the inside door panel.
•Attach the custom front with the (6) six #8 x 3/4” screws provided.
23” (58.4 cm)
MODEL | DEWD170 | DEWD100 | |||
B | 26 | 1/2”(67.3 cm) | 29 | 1/2” (74.9 cm) | |
C | 24 | 7/8”(63.2 cm) | 27 | 7/8” (70.8 cm) |
|
Interior width | 18 | 7/8 (47.9 cm) | 21 | 7/8” (55.6 cm) | |
Interior height | 5 7/16” (13.8 cm) | 5 7/16” (13.8 cm) | |||
Interior depth | 21 | 3/16” (53.8 cm) | 21 | 3/16” (53.8 cm) | |
|
|
|
|
|
|
Approx. shipping |
|
|
|
|
|
Weight | 80 lb. (36 kg) | 90 lb. (40.5 kg) | |||
|
|
|
|
|
|
CABINET INSTALLATION
•To remove drawer assembly, pull warming drawer pan out until fully extended. Slide finger along the right and left side until you reach the black hand latches (located at the front of the rails). Pull up on both the right and left latches and pull drawer pan support completely out.
•Slide cavity assembly into cabinet opening.
•Drill (4) pilot holes in cabinet using 1/8” drill bit. Permanently secure the warming drawer using the (4) #8 mounting screws provided.
•Replace drawer assembly.
4 | 5 |
