IMPORTANT
3
–Please Read and Follow
Yoursafety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. ALWAYS read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
Hazards or unsafe practices
whichWILL resultin severepersonal
injury or death

DANGER

Hazards or unsafe practices
which COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal injury
or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury,and tell you what can happen if
the instructions are not followed.
WARNING

CAUTION

Table of Contents
Warnings & Important Information_____________________________________________________3
Planning Information _________________________________________________________________5
Wiring______________________________________________________________________________6
Hood Preparation (Ducted Configuration) ______________________________________________7
Hood Preparation (Non-Ducted Configuration) __________________________________________8
Installation__________________________________________________________________________9
Mounting Bracket ________________________________________________________________9
Hood__________________________________________________________________________10
Non-ducted Recirculation Filter___________________________________________________11
Operation _________________________________________________________________________12
Maintenance_______________________________________________________________________13
WARNING

FIRE AND

ELECTRICAL

SHOCK HAZARD

Toreduce the risk of fire, electric shock, or
injury to persons, observe the following:
• Usethis unit only in the mannerintended
by themanufacturer.If you have questions,
contactthe manufacturer at the address or
telephonenumber listed in the warranty.
• Before servicing or cleaning unit, switch
power off at service panel and lock
service panel to prevent power from
being switched on accidentally.When
the service disconnecting means cannot
be locked, securely fasten a prominent
warning device, such as a tag, to the
service panel.
• Installation work and electrical wiring
must be done by a qualified person(s) in
accordance with all applicable codes and
standards,including fire-rated construction
codesand standards.
• Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel burning
equipment to prevent backdrafting.
Follow the heating equipment
manufacturer’s guidelines and safety
standards such as those published by
the National Fire Protection Association
(NFPA),and theAmerican Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and
the local code authorities.
• When cutting or drilling into wall or
ceiling, DO NOT damage electrical wiring
and other hidden utilities.
• Ducted fans must ALWAYSbe vented to
the outdoors.
•DO NOT use this unit with any separate
solid-state speed control device.
• Toreduce the risk of fire, use only metal
ductwork.
• This unit must be grounded.