Product Care
Door Removal
WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers.
2
Remove hinge trim screws
and hinge trim.
4
Lift door up and out.
1
Open door completely. Place pins, supplied with unit, in pin holes. For personal safety, ONLY use pins supplied with the unit.
3
Close until pins stop door.
Door Replacement and Adjustment
1 | 2 |
| 2 |
| 1 |
| 2 |
| 3 |
Reinstall door to range. | Open door completely. |
Reinstall hinge trim on both sides.
3 | 4 |
Remove pins from holes in hinges. | Close door. |
5
If the door needs to be adjusted, loosen hinge | Product | |
trim screws located in Step 2. Adjust the screws | ||
| ||
located between the door and kickplate |
| |
using a 5/32” hex head allen wrench. After | Care | |
adjustment, tighten hinge trim screws. | ||
|
42
43
