Countertop Side Trim
Place the countertop side trim template against the side of the range or rangetop. The flange of the template should be wrapped around the back of the unit. The top of the template should be even with the top edge of the outer trim. Mark the holes and remove template. Using a 9/64” drill bit, drill the three designated holes into the side of the range or rangetop. Place the countertop side trim into place and secure with the (3) provided screws.
Countertop Rear Trim
1.Locate screw hole openings (A) on back of island trim near the top.
2.Align screw hole openings on countertop rear trim with the ones on the back of the island trim.
3.Attach rear trim to island trim with enclosed screws.
A
4 | 5 |
