Getting Started

Table of Contents

Getting Started

Before Using Hood ______________________________________________6

Product Controls/Operation

Settings and Functions __________________________________________7

Settings and Functions

Hood Operation

Always turn on your hood before you begin cooking to establish airflow in the kitchen. Also let the blower run for a few minutes to clear the air after you turn off your cooking appliance. This will help keep the kitchen air cleaner.

Indoor Hood Control Panel (All except 10” H.)

Getting Started

Hood Operation _____________________________________________8

Using Outdoor Models ________________________________________8

Product Care

Cleaning and Maintenance _____________________________________9

Baffle Filters ________________________________________________9

Charcoal Filters ___________________________________________________ 10

Hood Canopy ____________________________________________________ 11

Enamel Finish _____________________________________________________11

Stainless Steel Finish ________________________________________11

Ductless Venting Chamber __________________________________12

Light Bulbs _________________________________________________12

ON/OFF - Blower speed knob—Starts and stops the blower. When turned on the blower will operate at the previous setting of the speed control. Push in on the knob to allow it to pop out. Turn the knob clockwise to increase the blower speed and counter clockwise to decrease speed. 0 is off, 1 is lowest speed, and 4 or 5 is the highest speed (depending on the model). The type of cooking you are doing will dictate the speed of the blower you use.

Heat Lamp

 

 

 

 

 

 

 

 

Light On/Off

 

 

 

 

 

 

 

 

Dimmer Knob

On/Off Switch

 

 

 

Fan On/Off

 

 

 

 

 

Heat Lamp

 

 

 

Blower

 

 

 

 

 

Indicator

LED Light

Speed Knob

LED Light

 

 

 

 

Light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Service Information _____________________________________________13

Warranty _______________________________________________________14

Before Using Hood

Although the hood is cleaned upon completion of the manufacturing process, you will probably need to clean your hood again after installation. Wipe the surface of the hood with a good household cleaner applied with a soft cloth, or stainless steel polish, depending on the finish of your hood. This will leave a protective finish on the hood.

CAUTION

DO NOT place flammable material on warming shelves when using heat lamps.

Light On/Off / Dimmer knob —Controls the 8-watt LED lights located in the front of

the hood. Push in on the

knob to allow it to pop out. Turn the knob clockwise to brighten the halogen lights and counter clockwise to dim the lights.. O is off, 1 is dimmest and 5 is the brightest.

Heat lamp switches— Push to turn the heat lamps on and off.

Each professional 18” H. wall hood will be equipped with one or two heat lamp outlets. The 250-watt infrared bulbs are not included and should be purchased locally.

6

7

Page 4
Image 4
Viking F21286 manual Table of Contents, Settings and Functions, Before Using Hood

F21286 specifications

The Viking F21286 is an exemplary model in the realm of modern maritime vessels, combining advanced technology with practical design to enhance both performance and versatility. This ship is recognized for its robust construction, making it suitable for a variety of marine applications, from commercial fishing to recreational cruising.

One of the standout features of the Viking F21286 is its cutting-edge hull design. The vessel's hull is engineered for optimal hydrodynamics, which reduces drag and increases fuel efficiency. This not only translates to lower operational costs but also enhances speed and maneuverability on the water. The material used in construction is often a composite of fiberglass and reinforced materials, providing strength while keeping the weight manageable.

The Viking F21286 is equipped with a powerful engine system that ensures reliable performance in diverse conditions. Typically, it features a twin-engine setup, allowing for greater control and redundancy. The engines are designed to be fuel-efficient, thus minimizing the environmental impact while maintaining high levels of output.

In terms of onboard technology, the Viking F21286 incorporates state-of-the-art navigation and communication systems. The vessel is often outfitted with advanced radar, GPS, and sonar capabilities, enabling real-time tracking and enhanced situational awareness. Modern touchscreen interfaces simplify operations, allowing crew members to manage systems with ease.

Moreover, the F21286 places a significant emphasis on safety and comfort. The ship is designed with anti-slip decks, reinforced railings, and advanced bilge systems that promote stability and security. The interior space is intuitively laid out, offering comfortable accommodations for crew and passengers alike, featuring amenities that make long voyages enjoyable.

Another notable characteristic is its eco-friendly initiatives. The Viking F21286 often comes equipped with systems that treat waste and reduce emissions, aligning with modern environmental standards. This commitment to sustainability reflects a broader trend in marine design aimed at protecting the oceans.

In conclusion, the Viking F21286 represents a harmonious blend of innovation, performance, and environmental responsibility. This vessel is not only built for resilience and efficiency but is also a testament to the commitment to improving maritime technology for future generations. Whether it's for commercial ventures or personal enjoyment, the Viking F21286 stands as a notable choice in the competitive maritime landscape.