Connect 10 Round Ductwork, USE and Care, Cleaning

CONNECT 10" ROUND DUCTWORK

1.Connect 10" round ductwork to blower. Run ductwork to downdraft location.

2.Refertodowndraftventilatormanualforinstructions on how to:

•Locate and cut holes in cabinet.

•Attach 10" round duct to downdraft.

NOTE: Use duct tape to make ductwork connections secure and air tight.

GREENWOOD, MISSISSIPPI 38930 USA

Disconnect electrical power supply and lock out service panel before cleaning or servicing this unit.

Remove cover and carefully vacuum blower and inside of housing. Be careful not to bend or otherwise damage blower wheel.

The motor is permanently lubricated. Do not oil or disassemble motor.

99042942D

Image 4

Contents

Specifications Plan InstallationALL Installations Viking Model VEDV900 Exterior Mounted Blower Prepare the Installation Location Roof InstallationsWall Installations Prepare the Blower Install the Blower Cleaning Connect 10 Round DuctworkViking Range Corporation USE and Care Viking Modèle VEDV900 Ventilateur Monté À L’EXTÉRIEUR AvertissementavertissementSpécifications Planification DE LA Pose Préparation DE L’EMPLACEMENT DE Pose Préparation DU VentilateurPoses SUR LES Toits Poses SUR LES Murs Illustration Pose DU Ventilateur Poses SUR LES ToitsIlllustration Noir Raccordement DU Conduit Rond DE 25,4 CM 10 PO Utilisation ET EntretienNettoyage Lubrification DU Moteur