Viking viking manual Illustration #6

Models: viking

1 4
Download 4 pages 5.36 Kb
Page 3
Image 3
Illustration #6

8.If desired, snap toe kick included with each unit to front legs. (See illustration #6).

Illustration #6

Snap toe kick to front legs

10.BACK PANEL INSTALLATION

•Remove all protective covering from panel and install using the #10 x 1/2” tek screws provided. (See Illustration #8).

•Attach rear toe kick to legs. (See illustration #8).

NOTE: For end of the run panels, the rear, front, and side toe kicks must be modified. (See illustrations #7 & #8)

2. Fasten from inside with (4) 1/2” tek screws provided

Illustration #8

9.SIDE PANEL INSTALLATION (End of Run Only) •Remove all drawers. (If applicable)

•Remove all protective covering from panel and install using the #10 x 1/2” tek screws provided. (See Illustration #7)

•Attach toe kick to legs (See Illustration #6).

NOTE:

FOR WALL INSTALLATIONS:

The front portion of the side toe kick must be shortened to match the front toe kick. (See Illustration #7). The plastic material can be cut with any common type wood saw blade.

FOR ISLAND INSTALLATIONS:

The side, front, and rear toe kick must be modified (See Illustration #7)

2. Attach from inside (front and rear)

1. Place side panel into area of the cabinet

Illustration #7

Front toe kick (A)

Side toe kick (B)

 

LH Side Panel Installation

 

(RH installs the same way)

 

Toe Kick Dimensions

 

 

Wall Installation

Island Installation

Front Toe Kick (A)

16 3/4” (42.5 cm)

 

16 3/4” (42.5 cm)

Side Toe Kick (B)

27 1/4” (61.6 cm)

 

25 1/2” (64.8 cm)

Rear Toe Kick (C)

N/A

 

16 3/4” (42.5 cm)

Back panel

1. Place back panel onto cabinet area

Manual background3. After modifying rear toe kick (See dimension chart at the bottom of page 4) - snap toe kick into place

Rear toe kick

11.INSTALL LOCALLY SUPPLIED COUNTERTOP

Viking outdoor cabinets are designed for a minimum countertop thickness of 1 1/8” (2.9 cm) such as you would find with granite or quartz material. If a countertop material thicker than 1 1/2” (3.8 cm) is used, the appliances should be shimmed to the proper height. For examples of common installations, see the Viking Stainless Steel Planning Guide.

12. Install Viking appliances per each appliance's installation instructions.

Complete Cabinet

4

5

Page 3
Image 3
Viking viking manual Illustration #6