Viking specifications CONNECT WIRING TO VIL1200 INLINE FAN

CONNECT WIRING TO VIL1200 INLINE FAN CONNECT WIRING TO THE ROUGH-IN PLATE

1.The opposite end of this wiring will be connected to the rough-in plate in the next step.

2.Remove wiring box cover from the inline fan.

3.Attach an appropriate UL approved cable connector to the wiring hole in the wiring box.

4.Bring electrical wiring through the cable connector in the electrical box.

5.Make electrical connections per the diagram shown below

������������		��������	115V
�����	����	���������	������
			�������
�����
	�����	���������
	�����
		���������

1.Run 115VAC electrical power cable from the service panel and from the inline fan to the rough-in plate part number PV300008

2.Remove appropriate knockouts from the range hood rough in box.

3.Attach appropriate UL approved cable connectors to the wiring holes in the range hood rough-in box.

4.Feed 6” of power cable through the cable connectors in the rough-in plate.

5.Using the diagram below make all electrical connections to the rough-in plate.

6. Attach wiring box cover.	6.	Attach wiring box cover to rough-in plate.
	7.	Attach rough-in plate to the studs at the inside top of
		the range hood with the (4) #10-24 nuts part number
		PV300146 provided.
	8.	Connect the plugin power cables of the rough-in kit to
		the range hood.

3