Villaware 5785 warranty TA K E S P E C I a L C AU T I O N W H E N U S I N G I C E

TA K E S P E C I A L C AU T I O N W H E N U S I N G I C E

~Use ice sparingly, and always add it as the very last ingredient. Never add ice as the first ingredient.

~Never use this appliance as an ice crusher. Never fill container exclusively with ice.

SA F E O P E R AT I O N O F YO U R S M O O T H E E - B A R ™ B L E N D E R

Place cover firmly on smoothee maker container before starting, and rest hand on the container cover when starting and running motor.

Always hold container while processing. If the container should turn when the motor is switched ON, switch OFF immediately and tighten the container back onto the motor base.

Never run the machine dry, without any ingredients inside.

Do not let cord hang over edge of table or countertop or to touch hot surfaces. Do not leave smoothee maker unattended while it is operating.

If the blades are stuck or difficult to turn, do not use smoothee maker. Blades should turn freely.

If the container is chipped or cracked do not use smoothee maker. Further use could result in the container breaking.

Do not attempt to place the container onto, or attempt to remove it from, the motor base while the motor is running.

If the motor seems to labor when processing of the lower speed, switch to the next higher speed to prevent overloading the motor.

Do not process mixtures too long. The smoothee maker performs its task in seconds, not minutes. It is better to stop and check the consistency after a few seconds than to overblend.

Do not overload the motor with extra-heavy or extra-large loads. If the motor stalls, turn off immediately, unplug cord from outlet and remove a portion of the load before beginning again.

Do not attempt to remove smoothee maker container from motor base or replace it until the motor has come to a complete stop. Smoothee maker parts can be damaged.

Do not place or store processing assembly on motor base without first correctly assembling to smoothee maker container. Severe injury can result if smoothee maker is accidentally turned on.

Do not use any utensil, including spatulas, in the container while the motor is running. They can catch in the moving blades, break the container and cause severe injury. Use only the smoothee-stick provided.

Do not use outdoors or for commercial purposes. Cut fruits and foods into pieces no larger than 1 inch.

If ever blending any hot foods or liquids, always allow it to cool before pouring into smoothee maker container for processing.

C L E A N I N G YO U R S M O O T H E E - B A R ™ B L E N D E R

First, always make sure that the smoothee maker is unplugged before cleaning.

1.Remove container from blender base and rinse with water to remove any large food particles that may have accumulated in the jar.

2.Wash the container and its parts in warm, soapy water and rinse well. Do not use heavy scouring pads. Do not wash in dishwasher.

3.Open the jar valve while washing to clean out the valve. As needed, you should unscrew the blade and gear in warm, soapy water. Caution: handle the blades carefully; they are sharp.

4.Rinse and dry each piece thoroughly. Use caution handling the cutting blades with extreme care and caution. They are sharp and may cause injury.

5.Wipe the motor base with clean, damp cloth. Caution: Do not immerse the blender base in water or other liquid.

NEVER immerse the motor base in water or other liquid. The motor base can be cleaned with a damp cloth. Always unplug first. The motor is permanently lubricated and does not require any additional lubrication. Do not use abrasive cleansers on any part of the blender.

Wash the stainless steel drip tray separately. Use paper towel and / or damp cloth to clean out any drippings in the reservoir beneath the stainless steel drip tray. Again do not immerse the drip tray reservoir, or any other part of the motor base, into water.

Important: Do not put any part or parts of blender in dishwasher. Do not use boiling water. The blade assembly bearings have been designed with a lifetime lubricant; exposure to boiling water may damage these bearings and shorten the life of the blender.

Dry immediately with an absorbent cloth. Do not allow parts to soak in water.

ACACACACACACACACACA 8 CACACACACACACACACACAACACACACACACACACACA 9 CACACACACACACACACACA