PROBLEMS WITH YOUR WINE CELLAR
You can easily solve many common wine cellar problems, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com.
TROUBLESHOOTING GUIDE
PROBLEM | POSSIBLE CAUSE | |
|
|
|
Wine cellar does | • | Not plugged in. |
not operate | • | Using wrong voltage |
| • The circuit breaker tripped or there is a blown fuse. | |
Wine cellar is not | • Check the temperature control setting; external | |
cold enough |
| environment may require a higher setting. |
| • The door is opened too often. | |
| • The door is not closed completely. | |
| • The door seal does not seal properly. | |
| • The wine cellar does not have the correct clearances | |
|
| to operate efficiently, safely and correctly. |
Light does not | • Call the service center. | |
work |
|
|
Vibrations | • Check to assure that the wine cellar is level. | |
|
| |
Wine cellar seems | • The wine cellar is not level. | |
to make too much | • Check the fans inside and at the back of the unit. | |
noise |
|
|
Door will not close | • The wine cellar is not level. | |
properly | • The doors were not properly installed. | |
| • The seal is weak. | |
| • The shelves are out of position. | |
|
| |
Temperature LED | • Main control board does not work. | |
display is blank | • The Power Control Board is not functioning. | |
| • There is some problem with the plug (no power | |
|
| supply). |
Temperature LED | • Display has suffered too much wear and tear. | |
display error | • Temperature sensor has been cut off. | |
Buttons are not | • Temperature controller panel is damaged. | |
functional |
|
|
10