Viper 500.4 manual Amplifier Connections 200.4 Rear

4.(+) 12 Volt Power - Connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery.

WARNING: Always protect this power wire by installing a fuse or circuit breaker of the appropriate size within 12 inches of the battery terminal connection.

5.Ground - Connect this terminal directly to the sheet metal chassis of the vehicle, using the shortest wire necessary to make this

FIGURE 2—AMPLIFIER CONNECTIONS 500.4 REAR

connection. Always use wire of the same gauge or larger than the (+) 12 volt power wire. The chassis connection point should be scraped free of paint and dirt. Use only quality crimped and/or soldered connectors at both ends of this wire. DO NOT connect this terminal directly to the vehicle battery ground terminal or any other factory ground points.

2 3 4 5

1

FIGURE 3—AMPLIFIER CONNECTIONS 200.4 REAR

2 3 4 5

1

© 2002 Directed Electronics, Inc 9