VP-9059 USER MANUAL 11
3-2 Mac OS 10.1X or Above
1. This FireWire 1394 External Drive is supported by IEEE 1394
Storage Support Mac OS 10.1X or above. You do not need to
install any drivers.
2. When you plug this external Hard Disk into the 1394 port of your
Mac computer, the mass storage volume should automatically
appear on the desktop in a few seconds.
3-3 Linux Kernel 2.4 or Above
This FireWire 1394 External Drive is supported by IEEE 1394
Storage Support Linux Kernel 2.4 or above. You do not need to
install any drivers.
4. Using The FireWire 1394 External Enclosure
After the first time installation, you can connect or disconnect the
FireWire 1394 External Enclosure VP-9059 without powering off
the computer.
Please follow the steps below when using the VP-9059.
4-1 Connect the FireWire 1394 External Enclosure VP-9059 to
Computer
Step1:
Plug the first 1394 port connector of the FireWire 1394 cable into
the 1394 port of your Firewire 1394 External Enclosure VP-9059.
Step2:
Plug the second 1394 port connector of the FireWire 1394 cable
into an 1394 port on your computer.
Step3:
Plug the power adapter power cord to the power inlet of your
FireWire 1394 External Enclosure VP-9059. Turn the power of the
VP-9059 ON.
Step4:
FireWire 1394 3.5” Portable External Enclosure VP-9059 is ready
for use immediately.