VIPowER VPM-62289 2-6 Connecting the VPM-62289 to a Computer

VPM-62289 USER MANUAL16

Step 1:

Turn your computer ON.

Step 2:

Connect the smaller/square USB connector end of the USB cable

into the USB Port on the VPM-62289 External Enclosure.

Connect one end of the FireWire Cable to one of the two FireWire

ports on VPM-62289 External Enclosure.

If your computer Only has one the 4-pins FireWire connector, use

the FireWire 4-pins to 6-pins converter cable. Connect the 6-pins

connector of the Converter Cable to the FireWire Cable, then

connect the 6-pin connector to the VPM-62289 External Enclosure.

Note:

Do NOT connect the USB and FireWire Cables to the

VPM-62289 External Enclosure at the same time. The

damage will result in the VPM-62289 External

Enclosure.

Step 3:

Connect the Power Adapter Power Cord to the +5V/+12V

Power Adapter. Then, plug one end of the power cord into an

AC power outlet, and the other end to the power inlet of the

VPM-62289 External Enclosure.

2-6 Connecting the VPM-62289 to a Computer

Computer Requirements

•USB and/or FireWire equipped notebook or desktop computer

•Windows 98SE/Me/2000/XP, or Mac OS 9.0 or above

Proceed with the following steps to connect the

VPM-62289 to your computer.