A s s e m b l y G u i d e

S T E P 2

BLUE BAG

•Mount the console to the console mast using four bolts (M8 x 15L) and tighten with the 5mm Allen wrench.

NOTE: Push all extra data cable into the console mast. Make sure not to pinch or cut the data cable.

T9500HRT AND T9700HRT

 

S T E P 3

handlebar to the console mast using

 

 

 

• Mount the right-hand side mount

PLATFORM TREADMILLS

 

 

two bolts (M8 x 135L). Repeat this on

 

 

the left-hand side.

 

 

 

To avoid possible damage to this Platform Treadmill, please follow these assembly steps in the correct

S T E P 2

 

order. Before proceeding though, find your new Platform Treadmill’s serial number,

located on the

 

 

 

underside of the main frame, and enter here:

Be sure to read your Owner’s Guide before using your new Platform Treadmill.

 

S T E P 3

DATA CABLES

 

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your Platform

 

 

 

 

Treadmill, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts

T9500HRT: Plug in

the

small

data

are in place and partially threaded in before completely tightening any ONE bolt.

cable into the small plug connection

 

 

 

 

on the lower control board. Plug in the

 

 

large data cable into the large plug

 

 

connection on the lower control

 

 

board.

 

 

 

 

 

T9700HRT: Plug

the

large

20-

 

 

ribbon cable into the 20-pin

S T E P 1

ORANGE BAG

connection on the lower control

board. Slide down the rubber covers

 

 

on the left & right console supports.

• Slide the rubber covers on to the left & right console supports, making sure that the lower cutout is facing inward.

• Install the motor cover making sure

that the rubber covers are inserted into

the motor cover. Secure the motor

T9700HRT: Slide the data cable down the right console support using the white wire tie as a guide. Make sure that the data (1 large ribbon cable) goes through the large hole in the lower part of the console upright.

T9500HRT: Slide the data cables down the right console support using the white wire tie as a guide. Make sure that the data cables (one small grey & one large black telephone-style cable) go through the large hole in the lower part of the console upright.

• Insert the left console support into the console support bracket and secure with two bolts (M8 x 55L Flathead) in the side of the console support bracket.

• Insert one bolt (M8 x 20L) in the rear of the console support bracket.

• Tighten all three bolts with the blue- handled 5mm Allen wrench.

• Repeat this on the right side.

S T E P 1

S T E P

S T E P

cover using the six (M4 x 12L) screws

(see Yellow bag).

4AUTO CALIBRATION

Please refer to back cover for this procedure, then return to Step 5.

5

BELT TENSION

NOTE: There are no data cables on

S T E P 5

the left side.

• If the running belt slips when used,

use the supplied 8MM Allen wrench to

turn the left and right tension bolts

clockwise 1/4-turn at a time until the

belt no longer slips.

• If the running belt is too far to the

right side, use the supplied 8MM Allen

wrench to turn the right tension bolt

clockwise 1/4-turn at a time until the belt remains centered during use. If the running belt is too far to the left side, turn the left tension bolt clockwise 1/4-turn at a time until the belt remains centered during use.

Page 1
Page 2
Image 2
Vision Fitness t9700hrt, T9500HRT manual Orange BAG, Auto Calibration, Data Cables, Belt Tension
Page 1

t9700hrt, T9500HRT specifications

Vision Fitness T9500HRT and T9700HRT are two exceptional treadmills designed for fitness enthusiasts seeking optimal performance and durability. Both models are tailored for home use yet come with commercial-grade features that make them stand out in the crowded treadmill market.

The Vision Fitness T9500HRT is equipped with a robust 3.0 HP continuous-duty motor, providing powerful and consistent performance during workouts. This treadmill features a spacious running surface of 20 inches by 60 inches, allowing users ample room to run or walk comfortably. It has a maximum speed of 12 mph, making it suitable for a wide range of training intensities, from brisk walking to intense sprinting.

On the other hand, the T9700HRT takes it a step further with a 3.5 HP motor, ensuring even higher speeds and more robust performance. Both models come with an adjustable incline feature, enabling users to simulate hill training and enhance their cardiovascular workout. The incline can be adjusted up to 15%, allowing for a varied and challenging fitness experience.

One of the notable features of both treadmills is their advanced console with a clear LCD display that provides real-time feedback on essential workout metrics, such as time, distance, speed, calories burned, and heart rate. The heart rate monitoring is facilitated through the contact sensors and optional chest strap, allowing users to stay within their target heart rate zone for maximum efficiency.

Additionally, both models incorporate Vision Fitness' patented Cushion Deck technology. This shock-absorbing deck reduces impact on joints during workouts, providing a more comfortable running experience while minimizing the risk of injury. The treadmills also come equipped with the optional Passport Media Player, which syncs with the treadmill to provide immersive workout videos set in stunning locations, transforming an ordinary workout into an engaging experience.

The T9500HRT and T9700HRT are designed for stability and safety. With a robust frame and a weight capacity of up to 350 pounds, these machines can accommodate a wide range of users. Furthermore, their easy-folding design facilitates space-saving storage when not in use.

In summary, the Vision Fitness T9500HRT and T9700HRT cater to users looking for a high-quality, feature-rich treadmill experience. With their powerful motors, varied incline settings, advanced console technology, and superior cushioning system, these treadmills stand as solid options for any fitness enthusiast looking to enhance their home workout routine.
Top Page Image Contents