Night Vision Camera
User Guide
4. Parts description
Sunshield
Mounting holes
Camera 
Bracket
5.Installation
1.Fix the mounting bracket to the wall as below figure.
2.Connect the camera with DC12V
and video output connector, power up and a video picture will be seen at the monitor.
VIDEO
(Optional)
12VDC
1. Features
The camera adopt 1/3" SUPER HAD Ⅱ CCD and advanced Digital Signal Processor (DSP) technology, Enhances picture quality greatly to a horizontal resolution of 540TVL, provides clearer and more vivid image.
Integrates
The camera provides automatic mode change over by sensing day or night conditions. It can change color mode in the day condition to optimal color and B/W mode in night condition for clear identification.
( Only the IR Cut filter removal Day/Night Camera)
Integrated efficient powerful IR LED array can capture
Light control design. Auto light detection for IR LED switch control and constant current; It is reported on light stability.
Exquisite design for circuit and structure, incarnates high technology.
Aluminum structure,
Outdoor sunshield housing available.
NIGHT VISION CAMERA | 1 |
6. Adjustment
Adjust varifocal lens according to the application.When adjusting, the lens should
be dismantled carefully by professional installer.
1.Screw off the camera's back cover .(Figure 1)
2.Use a
3.After adjustment finished, gyre the back cover, and cover the sunshield on the camera. (Figure 3)
Focus adjustment
View Angle adjustment
Figure１Figure２
Figure３
2. Caution
Do not disassemble or modify the camera to avoid possible fire, electric shock or other hazard Please refer repairs or service to a qualified service technician.
Take care when installing the camera. Avoid scratching the front glass window.
Avoid Shock, Vibration. Do not install the camera on an unstable surface. It can be damaged by improper use or storage.
Never point the camera towards direct sunlight or other sources of bright light in order to avoid a dimmer image due to too much backlighting or causing smear.
Use the camera within the published temperature, humidity, and electrical ranges.
Provide ample slack in the video and power cables once the camera is installed in its final position.
Request for service by a qualified technician if the camera malfunctions or generates excessive amounts of heat.
NIGHT VISION CAMERA | 2 |
7. Specifications
Model | ||
Image Sensor | 1/3'' SUPER HAD II CCD |
|
Signal System | PAL | NTSC |
Effective Pixels | 752(H)x582(V) | 768(H)x494(V) |
Resolution | 540TV Lines(Color), 600TV Lines(B/W) | |
MinimumIllumination | 0.1Lux/F1.2(IR LED OFF), 0Lux (IR LED On) | |
Shutter Speed | ||
S/N Ratio | More Than 50dB |
|
White Balance | Automatic |
|
AGC/BLC | Automatic |
|
Gamma Correction | 0.45 |
|
Sync Model | INT |
|
Lens | Varifocal lens, |
|
IR LED | Wave Length 850nm, x 36pcs IR LED | |
IR BeamDistance | 25~30m |
|
IR LED Drive | On: 1~3Lux; Off: 5~6Lux | |
Video output | ||
Pow er Input | DC12V Regulated |
|
Pow er Consumption | 150mA(IR LED OFF)+280mA(IR LED ON) | |
Operating Temperature | ||
Body | Aluminum |
|
Weight | 1000g |
|
All data and specifications subject to change without notice.
3. Accessories list
Unpack the camera carefully and make sure that all accessories are included for the installation.
No. | Items | Quantity |
1 | Camera | 1 PCS |
2 | Sunshield | 1 PCS |
3 | Instruction | 1 PCS |
4 | Screws | 1 Bag |
If any parts are missing, please contact your distributor for assistance.
NIGHT VISION CAMERA | 3 |
8. Type Number Overview
Model | ||
Signal system | PAL/12VDC | NTSC/12VDC |
9. Dimensions
284
NIGHT VISION CAMERA | 4 | NIGHT VISION CAMERA | 5 | NIGHT VISION CAMERA | 6 | NIGHT VISION CAMERA | 7 |
