Vita-Mix T&G2 ustom Programming

The T&G 2 Blending Station®advanced electronic control can be custom programmed by using the

control panel. The two different programming instructions are explained below:

1. Press the OWNER CONTROLbutton (Vita-Mix Logo).

2. Press the PULSEHigh/Low buttons to scroll thru the ‘RECIPE’ numbers.

3. Press the number of the button for programming. (For a description of each recipe refer to T&G 2

Blending Station 34 Programming Options insert included with your machine.)

For Example: If you wanted to program Button One with Recipe #17

1. After pressing the OWNERCONTROL button. The DISPLAY

SCREEN will say “RECIPE 1-34”.

2. Then repeatedly press the “H” PULSEbutton until the screen

displays “RECIPE #17”.

3. Then press the ONE button to apply Recipe #17.

4. Either continue programming the other five buttons or press the

OWNER CONTROLbutton to exit and continue blending.

Re-programming all of the buttons will erase any individual programs set

using the instructions above.

1. Press the OWNERSCONTROL button (Vita-Mix Logo) and HOLD until “REPROGRAM ALL” appears

on the screen.

2. Press Button One to Six to re-program allthe buttons to a family of similar blending cycles.

• Press Button One for program SMOOTHIE-

Blends drinks with just juice and ice.

• Press Button Two for program SMOOTH2 -

Blends regular smoothies for an extended cycle.

• Press Button Three for program COFFEE-

Blends light coffee drinks.

• Press Button Four for program SHAKES -

This cycle is good for ice cream and milkshakes.

• Press Button Five for program COCKTAIL-

Blend margaritas, daiquiris.

• Press Button Six for program OTHER -

Specialty drinks, using frozen fruit and other hard ingredients for a

thick but consistent drink.

ustom Programming