17
Dimensions:Overall Dimensions of 64 oz. / 2.0 Ltr. Polycarbonate Container with lid and base:
20 in. / 51 cm High x 8 in. / 20.3 cm Deep x 9 in. / 22.9 cm Deep
Overall Dimensions of 48 oz. / 1.4 Ltr. Polycarbonate Container with lid and base:
17.5 in. / 44 cm High x 8 in. / 20.3 cm Wide x 9 in. / 22.9 cm Deep
Ship weight of machine: 13 lbs. / 5.9 kg
Power Requirements:Volts: 120 VAC
Amps: 11.5 (2+ peak hp*)
12.5 (3+ peak hp*)
Hz: 50/60
16
1. Problem:
•Increased vibration
•Leaking from bottom of container
•Increased container noise
Solution #1:
Check blade assembly for loose, damaged
or nicked components and replace.
Solution #2:
Tighten retainer nut with retainer nut wrench
moving clockwise until it is snug. See page 10.
3. Problem:
•Loud noise from blade area
•Blades don’t spin
Solution:
Drive Socket may be broken. Check for a
fine crack down the center or worn teeth –
replace with a new drive socket (Item
#891). Instructions are included with part.
4. Problem:
•BarBoss Pulse/Timer Blender will
not run when START/STOPTIMER
switch is activated
Solution:
Check ON/OFF power switch to make
sure the switch is in the ON position.
Note: START/STOPTIMER switch is lit
when power is on.
2. Problem:
•Machine will not run
Solution #1:
Double-check to make sure power cord is
firmly in power outlet.
Solution #2:
Check to make sure switches are clean
and moving freely.
Solution #3:
The thermal protector may have shut the
machine off. Turn power off for up to 45
minutes to reset. Note: Cooling may be
quickened by placing the motor base in a
cool spot. (Unplug first.) Try circulatingthe
air with a fan or vacuum aimed at the
bottom of the motor base.
Cooling the motor:
Machine may stop working if it is overloaded on low speed. Reset by turning power
offfor 30 seconds. Do not turn power offmidway through a blending cycle. To interrupt
cycle, press START/STOPTIMER switch one time. See page 4.
If you cannot fix your machine with these suggestions, technical help is available by
calling 800-4DRINK4 (800-437-4654) or 440-235-0214.If outside the United States and
Canada, contact your local Vita-Mix Distributor or telephone the Vita-Mix International
Division at +1.440.782.2450 or email international
@
vitamix.com for a distributor in
your country.
Volts: 220-240 VAC
Watts: 750-850 (2+ peak hp*)
Watts: 1100-1200 (3+ peak hp*)
Hz: 50/60
Volts: 100 VAC (Japan)
Watts: 900 (2+ peak hp*)
Watts: 975 (3+ peak hp*)
Hz: 50/60
*varies with voltage
Volts: 120 VAC EMC (Taiwan)
Amps: 11.5 (2+ peak hp*)
Hz: 60
64 oz. / 2.0 Ltr.