Using Coaxial (RF)

To connect your VCR using coaxial (RF) audio and video :

1Connect the “output to TV” (RF out or Antenna out) jack on the back of your VCR to the TV/CABLE IN jack on the back of your RPTV.

2Select TV using the INPUT button on the front of your RPTV, then go to channel 3 or 4.

If you have an off-air antenna or cable box, connect your off-air antenna or cable TV cable to the TV/CABLE IN connector on the back of your VCR.

Warning If an outdoor antenna or cable system is connected to your

RPTV, make sure that the antenna or cable system is correctly grounded. For more information, see “Television antenna connectors protection (for systems fitted with TV/cable TV tuner cards)” on page 52.