Replacing the Lamp

You should replace the lamp in the RPTV approximately every 6000 hours to maintain the best possible display image. Do not use a lamp past the rated lamp life.

Warning The high-pressure lamp may explode if handled incorrectly. Make

sure that your Micro Chip Display Projection TV is turned off, power is disconnected, and the lamp is completely cool (minimum of 45 minutes) before replacing the lamp.

To replace the lamp :

1Turn off your Micro Chip Display Projection TV.

2Disconnect the power cord and all other external cables.

3Let the lamp cool completely (approximately 45 minutes).

4Remove the two lamp access panel screws, then remove the access panel.

Screws

5Remove the two lamp module retaining screws.

Screws