![](/images/backgrounds/184863/bg12.png)
How do I return to the
Setup App?
There is a picture, but
there is no sound.
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
There is no power.
• The on-screen menu has guided setup. Press menu > Guided Setup. Select the type
of setup you need and press ok. The Setup App begins.
• To reset the TV to factory defaults, press menu > System > reset & admin > reset tV
to factory defaults. If you have changed the default Parental Control Passcode, enter
it now. Select reset. Remember that all of your settings will be lost.
• Press the Volume up button on the remote.
• Press the mute button on the remote to ensure that mute is off.
• Press menu, then select audio. Be sure tV Speakers is set to on.
• Be sure your connected devices are turned on.
• Press the input button on the remote and select the input to which your device is
connected (TV, HDMI-1, COMP, etc.).
• Note that some television channels add black bars to the picture.
• Set the TV image mode so that the picture fills the screen. Press the Wide button on
the remote until the screen is filled, and then press ok.
• Adjust the video settings of your external device,
• Be sure the power cord is securely connected to the AC socket on the TV and to a
working electrical outlet.
• Press the poWer button on the remote or on the side of the TV.
• If the above steps do not work, try plugging the power cord into a different outlet.