Setting the Tuner Mode
If you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the tuner mode.
1. Press the MENU button on the remote. The |
displayed. |
5
Scanning for Channels
Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different
2. | Use the Arrow buttons on the remote to highlight the |
| Settings icon and press OK. The Settings menu is displayed. |
3. | Highlight Tuner and press OK. The Tuner Settings menu is |
| displayed. |
4. | Highlight Tuner Mode, then use the Left/Right Arrow buttons |
| to select Antenna or Cable. |
5. | Press the EXIT button on the remote. |
1.From the Tuner Settings menu, highlight Auto Channel Scan. The auto channel scan begins.
2.Wait until the channel scan is 100% complete. Highlight Done and press OK.
3.Press the EXIT button on the remote.
VIZIO |
|
Channel Scan |
|
Channels Scan |
|
Digital Channels: | 0 |
Analog Channels: | 19 |
18% Complete |
|
Cancel |
|
Press OK to finish |
|
31
