VIZIO 60HZ E SERIES User Manual
Remote Control Range
•The effective range of the remote control is approximately 26 feet (8 meters) from the front of the receiver window and 13 feet (4 meters) at 45° to the left and right.
•Point the remote control at the remote control sensor on the front of your HDTV to send commands.
•Do not place any obstacles between the remote control and the remote control sensor.
VIZIO Remote Control Precautions
•Keep the remote dry and away from heat sources and humidity.
•If your HDTV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.
•When not using the remote control for a long period of time, remove the batteries.
•Do not take the batteries apart, heat them, or throw them into a fire.
•Do not subject the remote control to undue physical stress, such as striking or dropping it.
•Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
•Do not mix old and new batteries or different types of batteries.
Inserting the remote control batteries
1.Remove the battery cover on the back of the remote control.
2.Insert two AA batteries (included) into the remote control, making sure you match the (+) and
3.
Precautionary Tips for Inserting the Batteries:
•Only use the specified AA batteries.
•Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
•Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.
•Dispose of the batteries in accordance with local laws and regulations.
•Keep the batteries away from children and pets.
Using a Cable or Satellite Remote
Your VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a
Cleaning the Housing and Remote Control
1.Use a soft cloth for cleaning.
2.If the housing or remote control is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the display with a dry cloth after cleaning.
| 14 |
Version 3/17/2010 | www.VIZIO.com |
