Vizio E420VP, E370VP Adjusting the Audio Settings, Adjusting the Picture Size and Position

5

Adjusting the Picture Size and Position

When displaying an image from the HDMI or RGB input, the size and position of the display image can be adjusted.

To adjust the picture size and position:

1.Ensure the input is set to HDMI or RGB.

2.From the Picture Settings menu, use the Arrow buttons on the remote to highlight More, then press OK.

3.Use the Arrow buttons on the remote to highlight Size & Position, then press OK. The Size & Position menu is displayed.

4.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:

•Auto Adjust - Automatically adjusts display image to optimal size and position. (RGB input only.)

•Horiz. Position - Adjusts the horizontal (left/right) position of the display image.

•Vertical Position - Adjusts the vertical (up/down) position of the display image.

•Horizontal Size - Adjusts the width of the display image.

•Fine Tune - Adjusts the height of the display image. (RGB input only.)

5.When you have finished adjusting the color temperature, press the EXIT button on the remote.

Resetting the Picture Settings

To reset the picture settings to the factory default settings:

1.From the Picture Settings menu, use the Arrow buttons to highlight More, then press OK.

2.Use the Arrow buttons on the remote to highlight Reset Picture Mode, then press OK. The TV displays, “Are you sure you want to RESET Picture Settings to the factory defaults?”

3.Highlight Yes and press OK.

4.Press the EXIT button on the remote.

E370VP / E420VP

Adjusting the Audio Settings

To adjust the audio settings:

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight Audio and press OK. The Audio Settings menu is displayed.

3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:

•Balance - Adjusts the loudness of the audio output from the left and right speakers.

•Lip Sync - Adjusts the synchroni- zation between the display image and the accompanying audio track.

•TV Speakers - Turns the built-in speakers on or off.

•Advanced Audio - See Adjusting the Advanced Audio Settings on page 17.

•Equalizer Settings - Adjusts the boost or attenuation of different frequencies. (This setting is only available when SRS TruSurround HD is set to Off.) Change the equalizer presets by selecting Flat, Rock, Pop, Classical, or Jazz. To change the equalizer settings yourself, highlight EQ Mode and press OK.

•Reset Audio Mode - Restores the audio settings to the factory defaults. See Resetting the Audio Settings on page 17.

4.When you have finished adjusting the audio settings, press the EXIT button on the remote.

16