Vizio E370VT, E420VT, E320VT user manual Installing the TV on a Wall

1

3.Using a phillips-head screwdriver, attach the base to the TV by inserting and tightening the 4 included screws.

Do not insert or tighten these 4 screws without the base attached.

4.Move the TV with attached stand into an upright position and place on a flat, level, and stable surface.

5.To ensure proper ventilation, leave at least 1” of space between the back of

the TV and any other objects (walls,	1”
etc).

E320VT / E370VT / E420VT

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model:

	E320VT	E370VT	E420VT
Screw Size:	M6	M6	M6
Screw Length:	20mm	20mm	20mm
Screw Pitch:	1mm	1mm	1mm
Hole Pattern:	100mm x 100mm	200mm x 200mm	400mm x 400mm

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.

Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.

To install your TV on a wall:

1.Disconnect any cables connected to your TV.

2.Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.

3.Using a philips-head screwdriver, remove the base by loosening and removing the screws.

4.Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.

Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See Appendix A - Specifications for the weight of this TV.

2