VIZIO 120HZ E SERIES User Manual

Adjusting the TV Settings

If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has changed, you can do so from the TV menu.

Press MENU/OK key to bring up the OSD menu, the default option is TV.

Select it by pressing either the MENU/OK key

The following options are available in the TV menu:

1.Input - This option allows to select the input, it being either DTV/TV, A/V, Component, HDMI1, HDMI2, HDMI3, HDMI4, RGB and PHOTO

2.Channels - This option allows to select the type of signal input, it being either antenna signal (over the air) or direct cable service (no a set-top box).

3.Menu Language - This option allows selecting the language to which it is preferred to have the OSD menu and instructions available to you.

4.Date & Time – Allows adjusting the displayed time and date.

5.PC Settings – If the selected input is connected through RGB (computer being used), this option allows adjusting of display to accommodate the signal

content.

Adjusting the Picture Settings

When viewing DTV / TV or an HDMI, Component, or AV source, the following picture adjustment OSD screens are available when you press MENU/OK on the remote control.

Press ▲ / ▼ / ◄ / ► to highlight and select the choice, then press MENU/OK key to select the desired adjustment, and then press the EXIT key when finished making adjustments.

Version 3/17/2010

38

 

www.VIZIO.com

Page 38
Image 38
Vizio E421VA, E470VA, E550VA, E371VA manual Adjusting the TV Settings, Adjusting the Picture Settings