6
Before mounting the speaker, check the ceiling structure is of drop ceiling with 2-foot standard ceiling tiles.

5. MOUNTING HARDWARE INSTALLATION

[Installation view on Drop Ceilings]

Caution
Set the tile bridge so that both ends fit securely into the T-grids, even if the ceiling tile accidentally falls off.
Ceiling tileT-grid
Tile bridge (accessory)
Ceiling tile
ø250 ±5 mm (9 27/32 ±13/64")

[Installation procedures]

Step 1. Cut a ø250 mm (9 27/32") hole in the ceiling.
Use the supplied paper pattern to position and trace the hole.
Step 2. Place the supplied tile bridge on the 2-foot tile as shown below.
T-grid
2-foot tile
Tile bridge (accessory)