Vizio P265V1 user manual Verizon FiOS TV P265v1 Remote Control Manual, Your Remote Control is now

Verizon FiOS TV

P265v1 Remote

Control Manual

Model: RC2655001/01B

For additional information about your FiOS TV service and your remote, go to www.verizon.com/fiostvhelp

For video instructions, press the <Menu> key on your remote then select Help on the Main Menu

Thank you for subscribing to FiOS TV Service. This User Manual will show you how to program and operate your new FiOS TV Remote Control (Model P265v1).

Quick Setup Guide-Verizon FiOS remote

The following steps will guide you to quickly set -up your Verizon FiOS TV remote for your TV.

1.Turn on your TV and the FiOS STB. Make sure you can see live television.

2.Locate the 3-digit code for your TV brand in the list below and circle the correct code.

AOC
			026
Shortlist			035
	of	brands	070
			114
Brands			128
		Code	146
			164
Magnavox			180
			193
Mitsubishi
			210
Panasonic
			222
Philips
Pion			243

If your TV brand is not listed, codes for additional TV brands are listed at the back of this manual.

3.Once you locate the brand code, press and hold the

<OK> and keys together. The RED LED on the remote control will blink twice and then stay on.

5-sec.

4.Enter the 3-digit TV code for your TV brand using the number pad. The RED LED will blink twice and then stay on.

5.Press and release the

<CH +> button repeatedly until the TV turns off. You can also “back up” by pressing the <CH -> button.

*Please note – some TVs may respond slower than others. Please allow 1 second between button presses.

6.Test that remote control is programmed for your TV

a. Turn the TV on using the

key.

b. Press <VOL +> and <VOL -> to make sure that the volume keys work.

c. Press and keys. d. If any of these keys do not work as expected, press

and hold that key. Release it as soon as it works.

7.If all these keys work, press <OK> to save this TV brand code programming. The RED LED will blink 3 times and then turn off

Your Remote Control is now programmed for your TV!

Acronyms

1.RC = Remote Control

2.STB = FiOS TV Set Top Box

3. VOL = Volume

4.CH+ = Channel Up

5.CH- = Channel Down

FiOS TV Remote Control		8) Troubleshooting			will blink each time a new
Codes for Major TV Brands		a. If the		button does not	code is sent.
TV Brand	Code		work correctly, make sure		6. When the TV turns off, stop
AOC	026		the TV is on and go back to		pressing the play button right
Audiovox	035		Step 1 of the Quick Start		away.
Coby	070		Guide. You can also try the		• Please note – some TVs
Envision	114		Code Search Method		may respond slower than
Funai	128		below.		others.
Haier	146	b.	If the <VOL>, <Mute>, or		7. You can press the <CH +>
Hitachi	164		<A/V> buttons do not work		or <CH -> buttons to go
Insignia	180		correctly, please refer to the		forward or back one TV code
JVC	193		Key Fix Feature.		at a time.
LG	210	c. If you think you made a			8. Test that the remote control
Magnavox	222		mistake with programming		is programmed for your TV.
Mitsubishi	243		your remote, you can always		a. Turn the TV on using the
Panasonic	279		press the <Exit> button and		key.
Philips	285		start over. The RED LED		b. Press <VOL +> and <VOL ->
Pioneer	290		will turn off if the RC is not		to make sure that the volume
Polaroid	294		in programming mode.		keys work.
Proscan	302	d.	If you don’t press any		c. Press	and	.
RCA	321		buttons for 60 seconds, the		d. If any of these keys do not
Samsung	331		remote control will		work as expected, press and
Sansui	332		automatically exit		hold that key. Release it as
Sanyo	333		programming mode.		soon as it works.
Sceptre	335	e.	Note, if you press the <CH>		9. If these keys all work, press
Sharp	342		button many times. and the		<OK> to save this TV brand
Sony	352		lights on the remote control		code programming. The RED
Sylvania	371		all flash rapidly, the		LED will blink 3 times and
Toshiba	397		programming attempt was		then turn off.
Viewsonic	418		not successful.
Vizio	424	f.	If the Brand Search method		Your Remote Control is now
Westinghouse	433		does not work, please try the		programmed for your TV!
Zenith	440		Code Search Method below,
			which scans the complete		10.Troubleshooting
			database for all TV codes.		a. If the	button does not
		g. If you are still having			work correctly, make sure
			problems programming the		the TV is on and go back
			remote, please refer to our		to Step 1 of the Code
			website at		Search Method.
			www.verizon.com/fiostvhelp		b. If the <VOL>, <Mute>, or
					<A/V>, buttons do not work
		Code Search Method to			correctly, please refer to the
					Key Fix Feature.
		Program the RC			c. If you think you made a
		(This method could take up to			mistake with programming
		8 minutes)			your remote, you can
		1.	Turn on your TV and the		always press the <Exit>
					button and start over. The
			FiOS STB.		RED LED will turn off if the
		2.	Make sure you can see live		RC is not in programming
			television.		mode.
		3.	Press and hold the <OK>		d. Please Note, the Code
			and	buttons together,	Search Method could take
				then release both.	up to 8 minutes, as it must
		• The RED LED will blink twice			go through over 500 codes.
			and then stay on.		The most common codes
		4.	Press and hold down the		are tried first, but you may
			button.		need to press and
		5.	The Remote Control will try		hold	for a while to
			a new TV code every		locate the correct code.
			second, and the RED LED

e. Once you have tried all the TV codes in the remote control, the RED LED and the backlit buttons will flash 4 times rapidly, the RED LED will turn off and the remote will exit the programming mode.

f.If you are still having problems programming the remote, please refer to our website at www.verizon.com/fiostvhelp

OPTIONAL FEATURES <STB Power> Button Turns on TV and STB

Your remote has separate power buttons for the TV and STB. You can program the key to turn on/off both your TV and STB at the same time.

1.Turn both your TV and STB on.

2.Press and hold the <OK>

and buttons together,

then release both.

• The RED LED will blink twice and then stay on.

3. Press 9 – 7 – 7.

•The Red LED will blink twice and remain on.

4. Press .

•The RED LED will blink 3 times and then turn off.

5.Test that the key now turns on the TV and STB at the same time.

6.If you want to reset the

remote so that the key controls Only the STB, follow the same steps as above but press <OK> in Step 4.

Control TV Volume

Through STB

If the volume control keys don’t work with your TV, you can program the remote so that the STB will control the volume.

1.Press and hold the <OK>

and buttons together, then release both.

2.The RED LED will blink twice and then stay on.

3.Press 9 - 5 – 5.

4.The RED LED light will blink twice, and remain on.

5.Press .

6.The RED LED will blink 3 times and then turn off.

7.If you want to change it back again so that volume buttons control the TV follow the same steps as above but

press in Step 5.

Key Fix

If your remote control is programmed for your TV, but the <VOL>, <Mute>, or the <A/V> keys do not work correctly, then you can try using the Key Fix feature to fix the buttons.

1.Press and hold the <OK> and buttons simultaneously.

•The Red LED will blink twice and then stay on.

2.Press and hold the key that does not work correctly.The remote control will try a new code every second.

3.Once the TV responds correctly, release the button.

4.Press <OK> to save the current settings and finish programming your remote control.

Reset the Remote Control Original Settings

1.Press and hold the <OK>

and buttons together, and release.

2.The RED LED will blink twice and then stay on.

3.Press 9 - 0 – 0.

4.The RED LED will blink 3 times and then turn off to indicate original settings are restored.

5.CAUTION, all previous programming in the remote control will be lost if you follow this procedure.

General Instructions

1.Make sure the remote control has a clear, unobstructed view of the STB and TV.

2.Your FiOS TV remote control will only operate your FiOS TV STB and your TV.

3.The remote will not operate other devices like DVD Player or Audio Receiver.

4.The <TV Power>,<VOL +>, <VOL ->, <Mute> and <A/V> buttons will always control your TV.

5.All other keys on the remote control will always control your FiOS TV STB.

Getting Started

1.Turn on your TV and the

STB using the and buttons.

2.If you have just watched a DVD, make sure your TV is set to the correct A/V Input for your STB.

3.Press the <CH +>,or <CH -> buttons to see the next higher or lower channel.

4.You can go directly to any channel by entering the channel number on the numberpad and pressing <OK>.

5.Press to see a list of

TV programs.

6. Press to return to TV

watching.

7.Press the button to launch the FiOS TV Main Menu. From the Main Menu you can access all the features of your FiOS TV service.

8.Press <▲> <▼> <►> <◄> keys to navigate through the FiOS TV Menus and Guides. To select any item, press <OK>.

9.Press to return to the last channel.

10.Press <Info> to see information about the current program.

11.Press <Exit> to return to the previous menu option or to watch TV.

New and Special Buttons

1. “On Demand” displays a list of movies and other programs you can watch at any time.

2. “Widgets” displays local weather, traffic, and other information.

3. displays your list of recorded programs if you have DVR service.

4. “Favorites” displays your list of favorite channels.

5.is a rocker button. Press lower half of

the button to

pause the program. Press upper half of the button <►> to continue to play from where you left off.

6. jumps back 30 seconds in the program you are watching.

7. jumps forward 30 seconds in the program you are watching.

8. records the current program.

9.Buttons , , and

will only operate during normal TV watching if you have DVR service.

10.“If the RED LED starts blinking 5 times rapidly when you press the <CH +/->, <CH +/->, and <OK>, or if the buttons stop lighting up, you should replace the remote control batteries”