LED INDICATORS
|
|
|
| LED Indicators are located here: | |
The LED Indicators will behave differently with each button on the remote control. | |||||
Function | LED Behavior |
|
| Description | |
| Analog Audio In - AUX (1) | Press the INPUT button on the remote to cycle through each available input: | |||
| Analog Audio In - AUX (2) | • | Analog Audio In - AUX (1) | ||
| Coaxial In - Digital (3) | • Analog Audio In - AUX (2) | |||
|
|
|
| ||
Input | Digital Optical Audio In - | • | Coaxial In- Digital (3) | ||
| • Digital Optical Audio In - Optical (4) | ||||
| Optical (4) | ||||
| Bluetooth | • | Bluetooth |
| |
|
|
|
| ||
|
| • USB Device - USB (6) | |||
| USB Device - USB (6) |
|
|
| |
| (When searching for device) | Press and hold the | button on the remote.The Sound Bar will be discoverable for 15 | ||
Bluetooth Pairing | Flash from Left to Right | minutes. You can now search for the Sound Bar (VIZIO S3821w) using your Bluetooth Device. | |||
and back continuously. | The sound bar will power down if no device is found. | ||||
| |||||
|
| Note: Set your Bluetooth device into pairing mode prior to the Sound Bar. | |||
| TruVolume On: | Press the TVOL button to enable/disable TruVolume. When enabled (On),TruVolume | |||
DTS TruVolume |
| provides a consistent and comfortable volume level for a more enjoyable listening | |||
On/Off | TruVolume Off: | experience. |
| ||
| TruSurround On: | Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will | |||
DTS TruSurround |
| produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo. | |||
On/Off | TruSurround Off: |
|
|
| |
| Two center LEDs indicate | Press the TREBLE button then press the Next/Previous button to increase/decrease the | |||
Treble Levels | Treble level 0. | treble level.The LED indicators will move to the right with increasing levels and to the left with | |||
|
| decreasing levels. |
| ||
| Two center LEDs indicate | Press the BASS button then press the Next/Previous button to increase/decrease the bass | |||
Bass Levels | Bass level 0. | level.The LED indicators will move to the right with increasing levels and to the left with | |||
|
| decreasing levels. |
| ||
