Vizio SB-38W Standard Speaker System GS-386W, Suspending the GS-386W, Components Configuration

Models: SB-38W

1 14
Download 14 pages 37.86 Kb
Page 5
Image 5
Standard Speaker System GS-386W

Standard Speaker System GS-386W

Components Configuration

Appearance

SB-38W:Low-frequency enclosure

HLS38UL-8×2:Low-frequency speaker unit

LE-M94:Constant directivity horn

HFD-260-8:Compression driver

HY-M94:Horn mounting bracket

Note

The HNW-500 dividing network is required when driving the

speaker system with passive operation.

Suspending the GS-386WSAORI Setting

1.When driving the speaker system with multi-amplifier operation using SAORI, set the channel divider module for a long delay type(IS-110DL4 and IS-110DL2) as shown in the following diagram. (F1 as low-frequency and F2 as high- frequency)

2.Since the level setting value is set to standard values which are used the same type amplifier's output power for each band, it may have to be adjusted according to the location and condition of the area in which it is used.

Note

CFQ:Crossover frequency of each filter

SLP :Slope characteristics of each filter 24S: 24dB/oct Bessel

12W: 12dB/oct Butterworth LEV :Output level of each band POL:Polarity of each band DLY:Delay value of each band HEQ:Horn equalizer

Manual backgroundSuspending the GS-386W

When suspending the GS-386W, make sure to suspend the constant directivity horn to upper direction using the optional HY-700 suspension kit as shown in the figure. Never suspend it

to lower of horizontal direction.

For mounting the HY-700 to the enclosure, refer to its instruction manual.

Caution

When suspending this speaker, make sure to suspend it after investigating structure of Installation locations, and confirming that the suspending wires or belts are heavy-duty to this

speaker.

TOA takes no responsibility for any accidents or injuries caused by faulty mounting methods or poorly selected mounting locations.

Total Weight:77kg

Frequency Response(Multi-Amplifier Drive Using the SAORI)

Measured at 1 watt(at 200Hz) and 2 meters. SPL shows the converted level into 1W/1m.

Make sure to suspend the constant directivity horn to upper direction.

Never suspend it to lower or horizontal direction.

- 5 -

Page 5
Image 5
Vizio SB-38W Standard Speaker System GS-386W, Suspending the GS-386W, Components Configuration, SAORI Setting