VIZIO SV422XVT HDTV User Manual
Confirm Remote Connection
Automatically program the VIZIO remote control to allow it to
control your device.
1. Turn the device on.
2. Point the VIZIO remote directly at the device.
3. Press OK to select Confirm Remote Connection. The
TV will attempt to communicate with the device.
4. Point the VIZIO remote at the device and the press the
Input power button. The device should turn off. If it does,
select It worked and press OK. If it does not power off,
select Try the Next Code. Repeat until you find a code
that works.
Parental Controls
If you want to restrict certain channel and program viewing, you can do
this by turning on the Parental Control. Selected programs, movies and
channels can then be made available only after an authorized password
has been entered and accepted by the TV.
To select the options in the Parental sub-menu, press OK and then enter a
password. The default password set in the factory is 0 0 0 0.
Note: The Parental menu does not appear when the input mode is set to
HDMI.
A new menu will be displayed showing the following Parental settings:
Rating Enable
Select from ON or OFF. If set to OFF, you will not be able to set
the USA-TV, USA-Movie, CAN-English, or CAN-French Ratings.
Channel Locks
Block individual channels from being displayed.
USA-TV
Note: When Enable Ratings is set to OFF, USA-TV adjustments
are not available.
Press OK to block (locked) or allow (unlocked) channels by the
following US TV ratings:
TV-Y—All children
TV-Y7—Older children
TV-G—General audience
TV-PG—Guidance suggested
TV-14—Strongly cautioned
TV-MA—Mature audience
46
www.VIZIO.com