Vizio sv472xvt Chapter 8 Maintenance and Troubleshooting

VIZIO SV472XVT HDTV User Manual

Chapter 8 Maintenance and Troubleshooting

1. Remove the power cable from the wall outlet.

2. Use a soft cloth moistened with diluted neutral cleaner to clean the TV and remote control. VIZIO

recommends using an HDTV cleaning solution which can be purchased at any major retailer.

3. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing.

4. Wipe the TV and remote control with a dry cloth after cleaning.

Important:

• Do not use volatile solvent (such as toluene, rosin and alcohol). Such chemicals may damage the

housing, screen glass, and remote control, and cause paint to peel.

• The screen glass is very fragile. Do not scrape it with any sharp object.

• Do not press or tap the screen to avoid cracking.

If the TV fails or the performance changes dramatically, check the display in accordance with the

following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the

display still fails to perform as expected, contact the VIZIO for assistance by calling 877-MYVIZIO (877-

698-4946) or e-mail us at techsupport@VIZIO.com.

“No Signal” is shown on

display

• Press INPUT to select the correct input source for the device you are

attempting to use.

• Insure that the desired device is powered ON.

• Check the connections of external devices that may be connected to your

HDTV

• Check video/device cable integrity. Try another cable (HDMI, Component,

AV/Composite, Coax etc.)

“No RGB Signal. Power will

be turned off” is shown on

display

• When using the RGB Input to connect to a computer, please insure that a

supported PC desktop resolution Is first selected.

• If no computer is connected, press INPUT to select a different input source.

• Note: If no computer is connected, and the input is not changed, the television

will power off.

No power (VIZIO logo is off)

• Make sure your AC power cable is sec urely connected to the back of the

television and wall outlet.

• Plug another electrical device into the outlet to insure the outlet is working

correctly.

• Try another electrical outlet elsewhere in your home. Preferably on a different

circuit.

• Try another AC power cable. Any standard 3 prong, grounded, UL approved

computer power cable can provide power to your television.

Version 12/10/2009 53