Vizio TL-WN721N manual 150Mbps Wireless Lite-N USB Adapter

TL-WN721N

150Mbps Wireless Lite-N USB Adapter

Figure 3-6

¾Power Save Mode - Please select the power save mode in the drop-down list.

•Maximum - Selects maximum mode to let the access point buffer incoming messages for the Adapter. The Adapter will detect the access point if any messages are waiting periodically.

•Normal - Normal mode uses maximum when retrieving a large number of packets, then switches back to power save mode after retrieving the packets.

•Off - Turns power saving off, thus powering up the Wireless USB Adapter continuously for a short message response time.

¾Network Type: There are basically two modes of networking:

•Infrastructure - All wireless clients will connect to an access point or wireless router.

•Ad-Hoc - Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more TL-WN721N wireless adapters.

)Note:

1)An Infrastructure network contains an Access Point or wireless router. All the wireless devices or clients will connect to the wireless router or access point.

2)An Ad-Hoc network contains only clients, such as laptops with wireless desktop adapters. All the adapters must be in Ad-Hoc mode to communicate.

¾Wireless Mode: Specifies 2.4 GHz 150 Mbps, 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps operation in an access point network. The Wireless adapter must match the wireless mode

15