VIZIO VA320M User’s Manual
22
www.VIZIO.com
COMPUTER
Connecting a PC Computer1. Turn off the power to the HDTV and PC
Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the
RGB output of your pc computer and the other
end to the RGB PC input (blue area on the back
of your HDTV).
3. Connect the Audio Out on your pc computer to
the RGB PC Audio input (blue area on the back
of your HDTV). This connection will require an
1/8” stereo mini plug.
4. Turn on the HDTV and PC Computer.
5. Select RGB using the INPUT button on the
remote control or on the side of your HDTV.
Note:
For the best picture quality when connecting a pc
computer through RGB PC, set your pc computer
timing mode to VESA 1366 x 768 at 60Hz. Please
refer to the pc or graphic card’s user guide for
additional information on how to set the timing
mode and the video output requirements of the
product.
A RGB (VGA) cable and stereo mini jack cable are
not included and can be purchased at an
electronics store.
1. Connect a thumb drive, directly inserting it into
the USB connection or by using an extension
(if thumb drive housing is too big to have it fit in
place) cable. Connecting a portable hard drive
or card reader to this input is also possible
2. If your HDTV has been turned off, please turn it
on.
3. The TV will start reading the contents in the
USB device automatically to make sure of
compatibility of files (MP3 or JPEG format).
4. Please follow the instructions in the Multimedia
section to either see the pictures (picture by
picture or as a slideshow) or listen to music
(single song or all selected songs) or
picture/music combination (slideshow with
background music.
Note: This input is also used as factory service port. Please back up important files to prevent lost
of data. Format your device to FAT32 and load your picture and music files, and enjoy your
viewing. For Pause/Live TV a fast speed FAT32 storage device is also needed, for a better
performance at least a 1GB of memory should be used.