VIZIO VM190XVT/VM230XVT User Manual
Pause-Live-TV (PLT)
This feature allows you to pause the digital program being watched (either from your cable service
without set-top box or from an antenna) and resume watching it at the point the program was paused.
Connect a USB 2.0 device with a minimum of 1 GB of memory and use the following buttons on the
remote control to operate this feature:
! II pauses the live program and starts recording for up to 29 minutes. A count-down timer will be
displayed.
! $ resumes the playback.
! and skips forward and rewinds in 15 second increments.
! exits back to live TV. You can also press TV, AV, COMP, or HDMI to exit this feature directly to
the different inputs.
Note: The connected USB device must:
! Have a minimum 1 GB of memory.
! Be formatted as FAT32.
! Have a write speed higher than 10Mb/sec.
! Be blank (contain no other files).
INFO Button
When the channel is changed or when you press the INFO button, an information header is shown over
the picture for a few seconds. Each press of the INFO button will display more information about the
program:
16
www.VIZIO.com