Vizio VR1 manual Vizio Remote Control

VIZIO VR1Remote User Manual

1.1 VIZIO Remote Control

REMOTE LED – Blinks when the remote operates.

POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode.

NUMBER BUTTON PAD – Use these buttons to select a channel or enter a password. The TV will switch to the channel entered automatically within a few seconds, or immediately if the OK button is pressed.

INPUT – This button allows the user to select the video input signal source.

-(Dash) – Use this button for the separation (-) of main and sub-channels when selecting a digital channel directly. For example, channel 28-2 would be selected by the following button sequence: 2, 8, (–), 2.

CH (+ or -)– These buttons change the channels up or down.

LAST – This button recalls the previously viewed channel. MUTE – This button turns the sound on and off.

VOL (+ or -)– Press to increase (+) or decrease (-) the volume.

MENU – Use this button to access the On-Screen Display (OSD) menus. INFO – This button displays the image and system information display.

GUIDE – This button displays program information. Note: this button is only functional for DTV.

EXIT – This button exits the On-Screen Display (OSD) menus.

- These buttons navigate the On-Screen Display (OSD).

OK – Use this button to select your chosen option in On-Screen Display (OSD) menus or direct channel selection using the number buttons.

Version 8/26/2008 3