VIZIO VW46L FHDTV10A User Manual
Preparing Your LCD HDTV for Wall Mounting
The VIZIO VW46L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VW46L FHDTV10A on the wall, please follow the instructions below for removing the stand base.
To remove the stand base
1.Unplug all of the cables and cords from your VW46L FHDTV10A.
2.Place the VW46L FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3.Remove the eight (8) screws holding the base to the TV.
4.Carefully remove the stand base.
Note: The specs for these screws are M4, 15mm long, .7 pitch.
5.Now, the VW46L FHDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang the VW46L FHDTV10A.
The pitch of the mounting holes is 630mm horizontally and 200mm vertically.
The screw type required is metric M8, 1.25mm pitch. The length of the screws will depend on the thickness plate being attach to the TV set; our brackets come with different length screws.
To find the perfect mount for the VIZIO VW46L FHDTV10A, browse VIZIO’s certified
mount selection at www.VIZIO.com or call directly
Version 12/7/2007 | 6 |
| www.VIZIO.com |
