Setup
Programming for TV, STB or DVD
Note: TV mode can be programmed for TV codes ONLY. STB and DVD mode can be programmed to control ANY kind of device listed in the code list. The remote is
1.Manually turn on your TV (STB or DVD).
2.Press the TV (STB or DVD) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.
3.Find the programming code for your TV (STB or DVD) in the code list and enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.
If the code is invalid, the LED will have a long blink and then turns off. Please repeat Steps 2 and 3 with the next code listed for the component and manufacturer.
4.Point the remote control at the TV (STB or DVD) and press the POWER button. The TV (STB or DVD) should turn off.
Note:
•If your TV (STB or DVD) does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes, page 13.”
•Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
6